Hello, welcome to Anlai Industrial Equipment Technology Co.,Ltd!

Products
  • best 280℃ high temperature HEPA air filter suppliers
    280℃ high temperature HEPA air filter

     High Heat resistance HEPA Filter with Clapboard Material and Operation Conditions Media Micron Glass fiber Sealant Red silicon for 250-280℃ Ceramic glue for 350-400℃ Frame <250℃ Aluminum/Galvanized steel/Stainless steel >250℃Galvanized steel or Stainless steel Separator 0.035mm thick aluminum oil Gasket Silica Gel Plate: 250-280℃ Polytetrafluoetylene :350-400℃ Filter Efficiency (EN1822) H13: 99.97-99.99%@0.3μm H14: 99.995-99.999%@0.3μm Max. Temperature 250-280℃              350-400℃ Max. Humidity 80% Product Introduction<<< Ultra-fine glass fiber media, aluminum foil separator, stainless steel frame, assembled from a special high temperature-resistance sealant can use well under high temperature environment at 400 ℃, the frame material and thickness to provide a variety options of the frame material and thickness. Each filter has been strictly tested before factory. Features: High efficiency, low resistance, high temperature-resistance, long-term use at 400 ℃ environment. Application: Electronics, semiconductor, pharmaceutical, food and other which production processes requires  a clean oven or high temperature air purification equipment and systems. Dimension and Parameter: Dimension & Parameters<<< Model Size (W×H×D)mm Air flow(m³/h) Intital Resistance(pa) Final Resistance(pa) Media area (m2) Dust Holding(g) Efficiency AL-H3-001 484×480×120 390 ≤200 400-600 4.4 230 H13-H14 AL-H3-002 610×610×120 620 ≤200 400-600 7.1 370 H13-H14 AL-H3-003 1220×610×120 1500 ≤200 400-600 14.1 740 H13-H14 AL-H3-004 484×480×150 530 ≤200 400-600 6.0 320 H13-H14 AL-H3-005 610×610×150 1000 ≤200 400-600 9.7 510 H13-H14 AL-H3-006 1220×610×150 2000 ≤200 400-600 19.3 1020 H13-H14 AL-H3-007 484×480×220 1000 ≤200 400-600 9.8 600 H13-H14 AL-H3-008 610×610×220 1600 ≤200 400-600 15.8 920 H13-H14 AL-H3-009 1220×610×220 3000 ≤200 400-600 31.6 1750 H13-H14 Customized design is welcome.

  • best Mini pleated HEPA filter suppliers
    Mini pleated HEPA filter

    Mini-Pleated HEPA filter Product Introduction<<< Mini-pleated HEPA filter made of ultra-fine glass fiber; with hot melt adhesive separated, plastic glue can be sure that the folds spacing, to ensure the best airflow through to reach a high dust holding capacity, full use of the filter media. Double-side spray mesh grille protect net to protect filter media not damaged, special sealant ensure the tightness of the entire filter. Frame uses hard anodized to increase the degree of corrosion resistance and durability. Each filter has been strictly tested before factory. Features: High efficiency, low resistance, light weight, thin, easy installation, low running costs. Application: Electronics, medicine, food, semiconductor manufacturing, Atomic, precision machinery, cosmetics and other places required high clean class. Material and Operation Conditions: Media Glass fiber Sealant PU Polyurethane Frame Aluminum/Galvanized steel/Stainless steel Protect net Spray diamond mesh Separator EVA hot melt adhesive Gasket PU Polyurethane, EVA, Neoprene Filter Efficiency (EN1822) H13: 99.97-99.99%@0.3μm H14: 99.995-99.999%@0.3μm Max. Temperature 70℃ Max. Humidity 80% Dimension & Parameters<<< Model Size (W×H×D)mm Air flow(m³/h) Intital Resistance(pa) Final Resistance(pa) Media area (m2) Dust Holding(g) Efficiency AL-H2-001 305×305×69 260 ≤200 400-600 2.5 150 H13-H14 AL-H2-002 484×484×69 700 ≤200 400-600 6.6 400 H13-H14 AL-H2-003 610×610×69 1000 ≤200 400-600 10.7 650 H13-H14 AL-H2-004 610×915×69 1600 ≤200 400-600 16.0 950 H13-H14 AL-H2-005 1220×610×69 2100 ≤200 400-600 21.3 1000 H13-H14 AL-H2-006 484×484×96 1000 ≤200 400-600 10.2 620 H13-H14 AL-H2-007 610×610×96 1500 ≤200 400-600 16.2 980 H13-H14 AL-H2-008 1220×610×96 3100 ≤200 400-600 31.9 1920 H13-H14 Customized design is welcome.

  • best V cell compact medium air filter suppliers
    V cell compact medium air filter

    V-type Medium filter                                      Material and Operation Conditions Media High humidity-resistance Glass fiber Sealant PU Polyurethane Adhesive Frame Plastic/Aluminum/Galvanized plate/Stainless steel Separator EVA  hot melt Gasket EVA  Neoprene Filter Efficiency  (EN779) F6:65%@0.5μm; F7:85%@0.5μm; F8:90%@0.5μm; F9:95%@0.5um Max. Temperature 70℃ Max. Humidity 80%-100%    Product Introduction <<< V-type air filter is mainly used for filtration of more than 0.5μm dust particles, multi- V Mini-pleat design with large filtration area, low resistance, long service life, the use of waterproof ultra-fine glass fiber media, polypropylene plastic frame can be completely incinerated, and mounting flange frame is interchangeable with bag filter. Features: Air-conditioning system secondary filtration, achieve big air flow demand at low wind resistance. Application: Industrial and commercial ventilation systems, centralized ventilation and air conditioning system of clean room   Dimension & Parameters<<< Model Size (W×H×D)mm No. of packs Air flow (m³/h) Intital Resistance (pa) Final Resistance (pa) Media area (m2) Dust Holding (g) Efficiency AL-MV-001 592×592×292 3 2800 ≤80 300-400 16.2 1460 F7 AL-MV-002 592×592×2 92 4 3700 ≤80 300-400 21.6 1950 F7 AL-MV-003 610×610×292 5 4700 ≤80 300-400 27.7 2490 F7 AL-MV-004 592×592×292 3 2600 ≤100 300-400 16.2 1430 F8 AL-MV-005 592×592×292 4 3500 ≤100 300-400 21.6 1900 F8 AL- MV-006 610×610×292 5 4500 ≤100 300-400 27.7 2440 F8 AL-MV-007 592×592×292 3 2900 ≤120 400-500 17.8 1570 F9 AL-MV-008 592×592×292 4 3600 ≤120 400-500 23.8 2090 F9 AL-MV-009 610×610×292 5 4900 ≤120 400-500 30.4 2680 F9 Customized design is welcome.  

  • best G3 Pleated Primary Air Filter With Paper Frame suppliers
    G3 Pleated Primary Air Filter With Paper Frame

     G3 Pleated Primary Filter  Material and operation conditions   Media Synthetic fiber Sealant Adhesive Frame Aluminum/Galvanized steel/Stainless steel/ Cardboard Protect Net Galvanized steel/Aluminum/Stainless steel/ Filter Efficiency (EN779) G1:40%@2.0μm; G2:65%@2.0μm; G3:85%@2.0μm; G4:90%@2.0μm. Max. Temperature 80℃ Max. Humidity 100% Product Introduction<<< Standard pleated primary filter, gradient-type structure to provide maximum airflow filter area, which is five times of the plane-type filter, welded steel protect net using surface rust treatment, can be well fixed linear pleated structure, protect filter media not punctured and prevent media not deformed due to excessive pressure, to ensure that filter surface is fully utilized. Can be common or moisture-proof paper frame, recycled or incinerated after use, non-pollution, environmental compliance. Features: Large filter area, long using life, large air volume, low resistance and dust holding capacity Applications: Air conditioning systems primary filtration, the Pre-filter in multi-stage filtration system      Dimension & Parameters<<< Model Size (W×H×D)mm Air flow (m³/h) Intital Resistance (pa) Final Resistance (pa) Media area (m2) Dust Holding (g) Efficiency AL-P1-001 287×592×46 1400 ≤25 100-200 1.23 60 G1 AL-P1-002 287×592×46 1400 ≤30 100-200 1.23 70 G2 AL-P1-003 287×592×46 1400 ≤40 100-200 1.23 80 G3 AL-P1-004 287×592×46 1400 ≤45 150-250 1.23 100 G4 AL-P1-005 592×592×46 2800 ≤25 100-200 1.23 104 G1 AL-P1-006 592×592×46 2800 ≤30 100-200 1.23 104 G2 AL-P1-007 592×592×46 2800 ≤40 100-200 1.23 117 G3 AL-P1-008 592×592×46 2800 ≤45 150-250 1.23 222 G4 Customized design is welcome.  

  • best G3 Pleated Primary Filter suppliers
    G3 Pleated Primary Filter

     G3 Pleated Primary Filter  Material and operation conditions   Media Synthetic fiber Sealant Adhesive Frame Aluminum/Galvanized steel/Stainless steel/ Cardboard Protect Net Galvanized steel/Aluminum/Stainless steel/ Filter Efficiency (EN779) G1:40%@2.0μm; G2:65%@2.0μm; G3:85%@2.0μm; G4:90%@2.0μm. Max. Temperature 80℃ Max. Humidity 100% Product Introduction<<< Standard pleated primary filter, gradient-type structure to provide maximum airflow filter area, which is five times of the plane-type filter, welded steel protect net using surface rust treatment, can be well fixed linear pleated structure, protect filter media not punctured and prevent media not deformed due to excessive pressure, to ensure that filter surface is fully utilized. Can be common or moisture-proof paper frame, recycled or incinerated after use, non-pollution, environmental compliance. Features: Large filter area, long using life, large air volume, low resistance and dust holding capacity Applications: Air conditioning systems primary filtration, the Pre-filter in multi-stage filtration system      Dimension & Parameters<<< Model Size (W×H×D)mm Air flow (m³/h) Intital Resistance (pa) Final Resistance (pa) Media area (m2) Dust Holding (g) Efficiency AL-P1-001 287×592×46 1400 ≤25 100-200 1.23 60 G1 AL-P1-002 287×592×46 1400 ≤30 100-200 1.23 70 G2 AL-P1-003 287×592×46 1400 ≤40 100-200 1.23 80 G3 AL-P1-004 287×592×46 1400 ≤45 150-250 1.23 100 G4 AL-P1-005 592×592×46 2800 ≤25 100-200 1.23 104 G1 AL-P1-006 592×592×46 2800 ≤30 100-200 1.23 104 G2 AL-P1-007 592×592×46 2800 ≤40 100-200 1.23 117 G3 AL-P1-008 592×592×46 2800 ≤45 150-250 1.23 222 G4 Customized design is welcome.  

  • best Activate Carbon Filter suppliers
    Activate Carbon Filter

    Activate Carbon Filter    Material and operation conditions Media Activated carbon fiber Sealant Adhesive Frame Aluminum/Galvanized steel/Stainless steel/Cardboard Odor removal rate >70% Max. Temperature 80℃ Max. Humidity 100% Product Introduction <<< Activated carbon filters are pleated type pre-filter, frame choose moisture-proof and humidity resistant industrial cardboard or aluminum frame , protect net surface with rust treatment , can be well fixed linear pleated structure. Activated carbon filter made of high quality carbon fiber media, have good effect of odor removal. Features: Light weight, strong ventilation, large filter area, strong adsorption performance characteristics, for low concentrations organic pollutants have a strong odor removal. Applications: Air conditioning and ventilation systems odor and air pollution treatment, absorption and removal of harmful gases (such as benzene, formaldehyde, ammonia, etc.), solvent recovery.   Dimension & Parameters<<< Model Size (W×H×D)mm Air flow (m³/h) Intital Resistance (pa) Media area (m2) Odor removal rate AL-P2-001 287×592×21 600 ≤40 0.47 ≥70% AL-P2-002 490×592×21 1000 ≤40 0.77 ≥70% AL-P2-003 592×592×21 1150 ≤40 0.93 ≥70% AL-P2-004 287×592×46 650 ≤40 0.52 ≥70% AL-P2-005 490×592×46 1100 ≤40 0.86 ≥70% AL-P2-006 592×592×46 1250 ≤40 0.97 ≥70% AL-P2-004 287×592×50 700 ≤40 0.56 ≥70% AL-P2-005 490×592×50 1150 ≤40 0.93 ≥70% AL-P2-006 592×592×50 1350 ≤40 1.06 ≥70%   Customized design is welcome.    

  • best G4 panel pleated prefilter suppliers
    G4 panel pleated prefilter

    G4 panel pleated prefilter     Product Introduction: Standard pleated primary filter, gradient-type structure to provide maximum airflow filter area, which is five times of the plane-type filter, welded steel protect net using surface rust treatment, can be well fixed linear pleated structure, protect filter media not punctured and prevent media not deformed due to excessive pressure, to ensure that filter surface is fully utilized. Can be common or moisture-proof paper frame, recycled or incinerated after use, non-pollution, environmental compliance.   Features: Large filter area long using life large air volume low resistance large dust holding capacity     Applications: Air conditioning systems primary filtration, the Pre-filter in multi-stage filtration system    Material and operation conditions: Media Synthetic fiber Sealant Adhesive Frame Aluminum/Galvanized steel/Stainless steel/ Cardboard Protect Net Galvanized steel/Aluminum/Stainless steel/ Filter Efficiency (EN779) G1:40%@2.0μm; G2:65%@2.0μm; G3:85%@2.0μm; G4:90%@2.0μm. Max. Temperature 80℃ Max. Humidity 100%   Dimension & Parameters:   Model Size (W×H×D)mm Air flow (m³/h) Intital Resistance (pa) Final Resistance (pa) Media area (m2) Dust Holding (g) Efficiency AL-P1-001 287×592×46 1400 ≤25 100-200 1.23 60 G1 AL-P1-002 287×592×46 1400 ≤30 100-200 1.23 70 G2 AL-P1-003 287×592×46 1400 ≤40 100-200 1.23 80 G3 AL-P1-004 287×592×46 1400 ≤45 150-250 1.23 100 G4 AL-P1-005 592×592×46 2800 ≤25 100-200 1.23 104 G1 AL-P1-006 592×592×46 2800 ≤30 100-200 1.23 104 G2 AL-P1-007 592×592×46 2800 ≤40 100-200 1.23 117 G3 AL-P1-008 592×592×46 2800 ≤45 150-250 1.23 222 G4   Customized design is welcome.

  • best Nylon Mesh Pre-filter suppliers
    Nylon Mesh Pre-filter

    Nylon Mesh Pre-filter