Hello, welcome to Anlai Industrial Equipment Technology Co.,Ltd!

pleated-prefilter
  • best Nylon Mesh Pre-filter suppliers
    Nylon Mesh Pre-filter

    Nylon Mesh Pre-filter

  • best G4 panel pleated prefilter suppliers
    G4 panel pleated prefilter

    G4 panel pleated prefilter

     

     

    Product Introduction:

    Standard pleated primary filter, gradient-type structure to provide maximum airflow filter area, which is five times of the plane-type filter, welded steel protect net using surface rust treatment, can be well fixed linear pleated structure, protect filter media not punctured and prevent media not deformed due to excessive pressure, to ensure that filter surface is fully utilized. Can be common or moisture-proof paper frame, recycled or incinerated after use, non-pollution, environmental compliance.

     

    Features:

    Large filter area

    long using life

    large air volume

    low resistance

    large dust holding capacity

     

     

    ApplicationsAir conditioning systems primary filtration, the Pre-filter in multi-stage filtration system 

     

    Material and operation conditions:

    Media

    Synthetic fiber

    Sealant

    Adhesive

    Frame

    Aluminum/Galvanized steel/Stainless steel/ Cardboard

    Protect Net

    Galvanized steel/Aluminum/Stainless steel/

    Filter Efficiency

    (EN779)

    G1:40%@2.0μm; G2:65%@2.0μm;

    G3:85%@2.0μm; G4:90%@2.0μm.

    Max. Temperature

    80℃

    Max. Humidity

    100%

     

    Dimension & Parameters:

     

    Model

    Size

    (W×H×D)mm

    Air flow

    (m³/h)

    Intital Resistance

    (pa)

    Final Resistance

    (pa)

    Media area

    (m2)

    Dust Holding

    (g)

    Efficiency

    AL-P1-001

    287×592×46

    1400

    ≤25

    100-200

    1.23

    60

    G1

    AL-P1-002

    287×592×46

    1400

    ≤30

    100-200

    1.23

    70

    G2

    AL-P1-003

    287×592×46

    1400

    ≤40

    100-200

    1.23

    80

    G3

    AL-P1-004

    287×592×46

    1400

    ≤45

    150-250

    1.23

    100

    G4

    AL-P1-005

    592×592×46

    2800

    ≤25

    100-200

    1.23

    104

    G1

    AL-P1-006

    592×592×46

    2800

    ≤30

    100-200

    1.23

    104

    G2

    AL-P1-007

    592×592×46

    2800

    ≤40

    100-200

    1.23

    117

    G3

    AL-P1-008

    592×592×46

    2800

    ≤45

    150-250

    1.23

    222

    G4

     

    Customized design is welcome.









  • best Mini pleated HEPA filter suppliers
    Mini pleated HEPA filter

    Mini-Pleated HEPA filter

    Product Introduction<<<

    Mini-pleated HEPA filter made of ultra-fine glass fiber; with hot melt adhesive separated, plastic glue can be sure that the folds spacing, to ensure the best airflow through to reach a high dust holding capacity, full use of the filter media. Double-side spray mesh grille protect net to protect filter media not damaged, special sealant ensure the tightness of the entire filter. Frame uses hard anodized to increase the degree of corrosion resistance and durability. Each filter has been strictly tested before factory.

    Features: High efficiency, low resistance, light weight, thin, easy installation, low running costs.

    Application: Electronics, medicine, food, semiconductor manufacturing, Atomic, precision machinery, cosmetics and other places required high clean class.


    Material and Operation Conditions:

    Media

    Glass fiber

    Sealant

    PU Polyurethane

    Frame

    Aluminum/Galvanized steel/Stainless steel

    Protect net

    Spray diamond mesh

    Separator

    EVA hot melt adhesive

    Gasket

    PU Polyurethane, EVA, Neoprene

    Filter Efficiency

    (EN1822)

    H13: 99.97-99.99%@0.3μm

    H14: 99.995-99.999%@0.3μm

    Max. Temperature

    70

    Max. Humidity

    80%




    Dimension & Parameters<<<

    Model

    Size

    (W×H×D)mm

    Air flow(m³/h)

    Intital Resistance(pa)

    Final Resistance(pa)

    Media

    area (m2)

    Dust Holding(g)

    Efficiency

    AL-H2-001

    305×305×69

    260

    ≤200

    400-600

    2.5

    150

    H13-H14

    AL-H2-002

    484×484×69

    700

    ≤200

    400-600

    6.6

    400

    H13-H14

    AL-H2-003

    610×610×69

    1000

    ≤200

    400-600

    10.7

    650

    H13-H14

    AL-H2-004

    610×915×69

    1600

    ≤200

    400-600

    16.0

    950

    H13-H14

    AL-H2-005

    1220×610×69

    2100

    ≤200

    400-600

    21.3

    1000

    H13-H14

    AL-H2-006

    484×484×96

    1000

    ≤200

    400-600

    10.2

    620

    H13-H14

    AL-H2-007

    610×610×96

    1500

    ≤200

    400-600

    16.2

    980

    H13-H14

    AL-H2-008

    1220×610×96

    3100

    ≤200

    400-600

    31.9

    1920

    H13-H14

    Customized design is welcome.