86-20-26231609
Hello, welcome to Anlai Industrial Equipment Technology Co.,Ltd!
Cargo Air Shower Room
Industrial Clean room Air Shower
Wholesales Industrial air shower interlock door clean room Air Showers
Industrial cleanroom aire shower
#Air Shower Introduction#
Air shower is necessary passing tunnel for personnel in and out of the clean room, and meanwhile played roll as air lock room, is effective equipment to prevent and remove the dust of outdoor air pollution into a clean room, is currently the purification workshop key equipments.
#Air Shower Definition#
in order to reduce large amounts of dust particles brought by staff, through HEPA filtered clean air by rotating nozzle jets from all directions to human body, effective and rapid removal of dust particles, after the removal of the dust particles the air by primary filters, efficient HEPA filter and recycled to the showering area again.
Air Cleaning equipment air shower room for ISO clean room
Laboratory cleanroom dynamic pass box interlock pass box with air shower
Standard construction is Epoxy Painted Steel, inside stainless steel/ full stainless steel 304.
316L Stainless Steel units are also available.
Flame polished 3/8” thick clear doors.
Continuous stainless steel piano hinge.
Heavy Duty 1/4 Turn chrome plated latching handles.
Mitered anodized aluminum trim molding to frame out opening.
Closed cell gasket around door opening
Many options are available for this unit such as an electronic interlock for heavy use, as in a hospital pharmacy application. Consult our factory trained experienced sales engineering staff for more details.
MODEL |
AL-APB500 |
AL-APB600 |
AL-APB750 |
AL-APB800 |
|||
External size(mm) (WXDXH) |
840X500X1350 |
940x600x1450 |
1090x750x1600 |
1140X800X1650 |
|||
Internal size (mm) (WXDXH) |
500X500X500 |
600x600x600 |
750x750x750 |
800x800x800 |
|||
Interlocker |
Mechanical or electronic for your choose |
||||||
SUS Nozzle |
4 PCS |
6 PCS |
|||||
Pre-filter (mm) |
425x275x17 |
525x275x17 |
560x275x17 |
560x275x17 |
|||
HEPA Filter(mm) |
360x360x69 |
484x484x69 |
630x630x69 |
630x630x69 |
|||
Air flow (m/s) |
1200m3/h |
1200 m3/h |
1200 m3/h |
1200m3/h |
|||
Fan power |
380v/50hz 750w (1set) |
||||||
Noise |
<78 |
<78 |
<78 |
<78 |
|||
Fan run(r/min) |
2800 |
2800 |
2800 |
2800 |
|||
Efficiency for |
99.995%@0.3um |
99.995%@ 0.3um |
99.995% @0.3um |
99.995% @0.3um |
|||
HEPA Filter |
|||||||
UV lamp |
1pcs |
1 pcs |
1 pcs |
1pcs |
|||
Material(Option)
|
1:Entirety Sus304 , |
||||||
2:Entirety sus201 , |
|||||||
3: External is steel with power coated, Internal is SUS304 |
|||||||
4: External is steel with power coated. Internal is SUS301 |
|||||||
Packing size |
1040x700x1550 |
1140x800x1650 |
1290x950x1800 |
1340x1000x1850 |
|||
Customized size is available.
Factory testing (all the sets you ordered) :
All of equipment is individually factory tested for safety and performance in accordance with international Standards. Each unit is shipped with a documentation outlining the tests undertaken and the unit’s individual results for each unit.
Factory test include:
--appearance testing
--functional test and visual inspection
--electrical safety tests
--air velocity testing
--noise testing
Warranty:
Our equipment is warranty for 1 year excluding consumable parts and accessories.
All equipment is shipped with a comprehensive use’s manual complete with a report documenting all test procedures.
Additional IO/OQ/GMP document is available upon request.
Contact our sales representative for specific warranty details or document request.
Standard export packing:
--Stretch film strapped whole cabinet,
--Foam inside protected,
--Plywood case solid fixed
--European standard bottom tray
Advantages
Own factory with competitive price
Automatic production line.
Nearly 20 years experience in cleanroom industry.
We are an expert in providing customized solutions.
Timely delivery with perfect quality.
Fortune 500 companies’ choice.
Have passed ISO9001.2008 certification.
All inquiries will be replied within 24 hours (except on weekends or public holidays).
Industrial cleanroom aire shower
#Air Shower Introduction#
Air shower is necessary passing tunnel for personnel in and out of the clean room, and meanwhile played roll as air lock room, is effective equipment to prevent and remove the dust of outdoor air pollution into a clean room, is currently the purification workshop key equipments.
#Air Shower Definition#
in order to reduce large amounts of dust particles brought by staff, through HEPA filtered clean air by rotating nozzle jets from all directions to human body, effective and rapid removal of dust particles, after the removal of the dust particles the air by primary filters, efficient HEPA filter and recycled to the showering area again.
Air Cleaning equipment air shower room for ISO clean room
G3 Pleated Primary Filter
Material and
operation conditions
| Media |
Synthetic fiber |
| Sealant |
Adhesive |
| Frame |
Aluminum/Galvanized
steel/Stainless steel/ Cardboard |
| Protect Net |
Galvanized
steel/Aluminum/Stainless steel/ |
| Filter Efficiency (EN779) |
G1:40%@2.0μm; G2:65%@2.0μm; G3:85%@2.0μm; G4:90%@2.0μm. |
| Max. Temperature |
|
| Max. Humidity |
100% |
Standard pleated primary filter,
gradient-type structure to provide maximum airflow filter area, which is five
times of the plane-type filter, welded steel protect net using surface rust
treatment, can be well fixed linear pleated structure, protect filter media not
punctured and prevent media not deformed due to excessive pressure, to ensure
that filter surface is fully utilized. Can be common or moisture-proof paper
frame, recycled or incinerated after use, non-pollution, environmental
compliance.
Features: Large
filter area, long using life, large air volume, low resistance and dust holding
capacity
Applications:
Air conditioning systems primary filtration, the Pre-filter in multi-stage
filtration system
Dimension
& Parameters<<<
|
Model |
Size (W×H×D)mm |
Air
flow (m³/h) |
Intital
Resistance (pa) |
Final
Resistance (pa) |
Media
area (m2) |
Dust
Holding (g) |
Efficiency |
|
AL-P1-001 |
287×592×46 |
1400 |
≤25 |
100-200 |
1.23 |
60 |
G1 |
|
AL-P1-002 |
287×592×46 |
1400 |
≤30 |
100-200 |
1.23 |
70 |
G2 |
|
AL-P1-003 |
287×592×46 |
1400 |
≤40 |
100-200 |
1.23 |
80 |
G3 |
|
AL-P1-004 |
287×592×46 |
1400 |
≤45 |
150-250 |
1.23 |
100 |
G4 |
|
AL-P1-005 |
592×592×46 |
2800 |
≤25 |
100-200 |
1.23 |
104 |
G1 |
|
AL-P1-006 |
592×592×46 |
2800 |
≤30 |
100-200 |
1.23 |
104 |
G2 |
|
AL-P1-007 |
592×592×46 |
2800 |
≤40 |
100-200 |
1.23 |
117 |
G3 |
|
AL-P1-008 |
592×592×46 |
2800 |
≤45 |
150-250 |
1.23 |
222 |
G4 |
Customized design is welcome.
G3 Pleated Primary Filter
Material and
operation conditions
| Media |
Synthetic fiber |
| Sealant |
Adhesive |
| Frame |
Aluminum/Galvanized
steel/Stainless steel/ Cardboard |
| Protect Net |
Galvanized
steel/Aluminum/Stainless steel/ |
| Filter Efficiency (EN779) |
G1:40%@2.0μm; G2:65%@2.0μm; G3:85%@2.0μm; G4:90%@2.0μm. |
| Max. Temperature |
|
| Max. Humidity |
100% |
Standard pleated primary filter,
gradient-type structure to provide maximum airflow filter area, which is five
times of the plane-type filter, welded steel protect net using surface rust
treatment, can be well fixed linear pleated structure, protect filter media not
punctured and prevent media not deformed due to excessive pressure, to ensure
that filter surface is fully utilized. Can be common or moisture-proof paper
frame, recycled or incinerated after use, non-pollution, environmental
compliance.
Features: Large
filter area, long using life, large air volume, low resistance and dust holding
capacity
Applications:
Air conditioning systems primary filtration, the Pre-filter in multi-stage
filtration system
Dimension
& Parameters<<<
|
Model |
Size (W×H×D)mm |
Air
flow (m³/h) |
Intital
Resistance (pa) |
Final
Resistance (pa) |
Media
area (m2) |
Dust
Holding (g) |
Efficiency |
|
AL-P1-001 |
287×592×46 |
1400 |
≤25 |
100-200 |
1.23 |
60 |
G1 |
|
AL-P1-002 |
287×592×46 |
1400 |
≤30 |
100-200 |
1.23 |
70 |
G2 |
|
AL-P1-003 |
287×592×46 |
1400 |
≤40 |
100-200 |
1.23 |
80 |
G3 |
|
AL-P1-004 |
287×592×46 |
1400 |
≤45 |
150-250 |
1.23 |
100 |
G4 |
|
AL-P1-005 |
592×592×46 |
2800 |
≤25 |
100-200 |
1.23 |
104 |
G1 |
|
AL-P1-006 |
592×592×46 |
2800 |
≤30 |
100-200 |
1.23 |
104 |
G2 |
|
AL-P1-007 |
592×592×46 |
2800 |
≤40 |
100-200 |
1.23 |
117 |
G3 |
|
AL-P1-008 |
592×592×46 |
2800 |
≤45 |
150-250 |
1.23 |
222 |
G4 |
Customized design is welcome.
Mini-Pleated HEPA
filter
Product
Introduction<<<
Mini-pleated
HEPA filter made of
ultra-fine glass fiber; with hot melt adhesive separated, plastic glue can be
sure that the folds spacing, to ensure the best airflow through to reach a high
dust holding capacity, full use of the filter media. Double-side spray mesh
grille protect net to protect filter media not damaged, special sealant ensure
the tightness of the entire filter. Frame uses hard anodized to increase the
degree of corrosion resistance and durability. Each filter has been strictly
tested before factory.
Features: High
efficiency, low resistance, light weight, thin, easy installation, low running
costs.
Application: Electronics,
medicine, food, semiconductor manufacturing, Atomic, precision machinery,
cosmetics and other places required high clean class.
Material and Operation
Conditions:
|
Media |
Glass
fiber |
|
Sealant |
PU
Polyurethane |
|
Frame |
Aluminum/Galvanized
steel/Stainless steel |
|
Protect
net |
Spray
diamond mesh |
|
Separator |
EVA
hot melt adhesive |
|
Gasket |
PU
Polyurethane, EVA, Neoprene |
|
Filter
Efficiency (EN1822) |
H13: 99.97-99.99%@0.3μm H14:
99.995-99.999%@0.3μm |
|
Max.
Temperature |
70℃ |
|
Max.
Humidity |
80% |
Dimension & Parameters<<<
Model |
Size (W×H×D)mm |
Air flow(m³/h) |
Intital Resistance(pa) |
Final Resistance(pa) |
Media area (m2) |
Dust Holding(g) |
Efficiency |
AL-H2-001 |
305×305×69 |
260 |
≤200 |
400-600 |
2.5 |
150 |
H13-H14 |
AL-H2-002 |
484×484×69 |
700 |
≤200 |
400-600 |
6.6 |
400 |
H13-H14 |
AL-H2-003 |
610×610×69 |
1000 |
≤200 |
400-600 |
10.7 |
650 |
H13-H14 |
AL-H2-004 |
610×915×69 |
1600 |
≤200 |
400-600 |
16.0 |
950 |
H13-H14 |
AL-H2-005 |
1220×610×69 |
2100 |
≤200 |
400-600 |
21.3 |
1000 |
H13-H14 |
AL-H2-006 |
484×484×96 |
1000 |
≤200 |
400-600 |
10.2 |
620 |
H13-H14 |
AL-H2-007 |
610×610×96 |
1500 |
≤200 |
400-600 |
16.2 |
980 |
H13-H14 |
AL-H2-008 |
1220×610×96 |
3100 |
≤200 |
400-600 |
31.9 |
1920 |
H13-H14 |
Customized design is welcome.
High Heat resistance HEPA Filter with Clapboard
Material and Operation Conditions
Media |
Micron Glass fiber |
Sealant |
Red silicon for 250-280℃ Ceramic glue for 350-400℃ |
Frame |
<250℃ Aluminum/Galvanized steel/Stainless steel >250℃Galvanized steel or Stainless steel |
Separator |
0.035mm thick aluminum oil |
Gasket |
Silica Gel Plate: 250-280℃ Polytetrafluoetylene :350-400℃ |
Filter Efficiency (EN1822) |
H13: 99.97-99.99%@0.3μm H14: 99.995-99.999%@0.3μm |
Max. Temperature |
250-280℃ 350-400℃ |
Max. Humidity |
80% |
Product Introduction<<<
Ultra-fine glass fiber media, aluminum foil separator, stainless steel frame, assembled from a special high temperature-resistance sealant can use well under high temperature environment at 400 ℃, the frame material and thickness to provide a variety options of the frame material and thickness. Each filter has been strictly tested before factory.
Features: High efficiency, low resistance, high temperature-resistance, long-term use at 400 ℃ environment.
Application: Electronics, semiconductor, pharmaceutical, food and other which production processes requires
a clean oven or high temperature air purification equipment and systems.
Dimension and Parameter:
Dimension & Parameters<<<
Model |
Size (W×H×D)mm |
Air flow(m³/h) |
Intital Resistance(pa) |
Final Resistance(pa) |
Media area (m2) |
Dust Holding(g) |
Efficiency |
AL-H3-001 |
484×480×120 |
390 |
≤200 |
400-600 |
4.4 |
230 |
H13-H14 |
AL-H3-002 |
610×610×120 |
620 |
≤200 |
400-600 |
7.1 |
370 |
H13-H14 |
AL-H3-003 |
1220×610×120 |
1500 |
≤200 |
400-600 |
14.1 |
740 |
H13-H14 |
AL-H3-004 |
484×480×150 |
530 |
≤200 |
400-600 |
6.0 |
320 |
H13-H14 |
AL-H3-005 |
610×610×150 |
1000 |
≤200 |
400-600 |
9.7 |
510 |
H13-H14 |
AL-H3-006 |
1220×610×150 |
2000 |
≤200 |
400-600 |
19.3 |
1020 |
H13-H14 |
AL-H3-007 |
484×480×220 |
1000 |
≤200 |
400-600 |
9.8 |
600 |
H13-H14 |
AL-H3-008 |
610×610×220 |
1600 |
≤200 |
400-600 |
15.8 |
920 |
H13-H14 |
AL-H3-009 |
1220×610×220 |
3000 |
≤200 |
400-600 |
31.6 |
1750 |
H13-H14 |
Customized design is welcome.
CE Certificated GMP Standard Cleanroom Air Shower
Air Shower is used to blow away dust on clothing, equipments, materials and tools before workers or objects enter the Clean Room; meanwhile, its Air Lock function may effectively control personnel passing in and out, as well as act as various levels of buffer room for clean room to prevent cross pollution.
AL-AS PERSONAL AIR SHOWER
| EXTERNAL SIZE | INNER SIZE(mm) |
BLOW |
Epoxy powder |
SUS INSIDE |
FULL SUS |
||||
W |
D |
H |
W |
D |
H |
DOUBLE-SIDE |
Cat. # |
Cat. # |
Cat. # |
1300 |
1000 |
2180 |
800 |
930 |
1960 |
DOUBLE-SIDE |
P1300-01A |
P1300-01B |
P1300-01C |
1300 |
1500 |
2180 |
800 |
1430 |
1960 |
DOUBLE-SIDE |
P1300-0SA |
P1300-0SB |
P1300-0SC |
1300 |
2000 |
2180 |
800 |
1930 |
1960 |
DOUBLE-SIDE |
P1300-02A |
P1300-02B |
P1300-02C |
1300 |
3000 |
2180 |
800 |
2930 |
1960 |
DOUBLE-SIDE |
P1300-03A |
P1300-03B |
P1300-03C |
1300 |
6000 |
2180 |
800 |
5930 |
1960 |
DOUBLE-SIDE |
P1300-06A |
P1300-06B |
P1300-06C |
| EXTERNAL SIZE | INNER SIZE(mm) |
BLOW |
Epoxy powder |
SUS INSIDE |
FULL SUS |
||||
W |
D |
H |
W |
D |
H |
DOUBLE-SIDE |
Cat. # |
Cat. # |
Cat. # |
1700 |
1500 |
2180 |
1200 |
1430 |
1960 |
DOUBLE-SIDE |
G1700-0SA |
G1700-0SB |
G1700-0SC |
1700 |
3000 |
2180 |
1200 |
2930 |
1960 |
DOUBLE-SIDE |
G1700-03A |
G1700-03B |
G1700-03C |
2000 |
1500 |
2180 |
1500 |
1430 |
1960 |
DOUBLE-SIDE |
G2000-0SA |
G2000-0SB |
G2000-0SC |
2000 |
3000 |
2180 |
1500 |
2930 |
1960 |
DOUBLE-SIDE |
G2000-03A |
G2000-03B |
G2000-03C |
2200 |
1500 |
2180 |
1700 |
1430 |
1960 |
DOUBLE-SIDE |
G2200-0SA |
G2200-0SB |
G2200-0SC |
| EXTERNAL SIZE(mm) | INNER SIZE(mm) |
BLOW |
Epoxy powder |
SUS INSIDE |
FULL SUS |
||||
W |
D |
H |
W |
D |
H |
DOUBLE-SIDE |
Cat. # |
Cat. # |
Cat. # |
1700 |
1500 |
2180 |
1200 |
1430 |
1960 |
DOUBLE-SIDE |
GA1700-0SA |
GA1700-0SB |
GA1700-0SC |
1700 |
3000 |
2180 |
1200 |
2930 |
1960 |
DOUBLE-SIDE |
GA1700-03A |
GA1700-03B |
GA1700-03C |
2000 |
1500 |
2180 |
1500 |
1430 |
1960 |
DOUBLE-SIDE |
GA2000-0SA |
GA2000-0SB |
GA2000-0SC |
2000 |
3000 |
2180 |
1500 |
2930 |
1960 |
DOUBLE-SIDE |
GA2000-03A |
GA2000-03B |
GA2000-03C |
2200 |
1500 |
2180 |
1700 |
1430 |
1960 |
DOUBLE-SIDE |
GA2200-0SA |
GA2200-0SB |
GA2200-0SC |
| EXTERNAL SIZE(mm) | INNER SIZE(mm) |
BLOW |
Epoxy powder |
SUS INSIDE |
FULL SUS |
||||
W |
D |
H |
W |
D |
H |
DOUBLE-SIDE |
Cat. # |
Cat. # |
Cat. # |
224 |
1500 |
2180 |
1500 |
1430 |
1960 |
DOUBLE-SIDE |
GF1700-0SA |
GF1700-0SB |
GF1700-0SC |
17000 |
3000 |
2180 |
1200 |
2930 |
1960 |
DOUBLE-SIDE |
GF1700-03A |
GF1700-03B |
GF1700-03C |
2000 |
1500 |
2180 |
1500 |
1430 |
1960 |
DOUBLE-SIDE |
GF2000-0SA |
GF2000-0SB |
GF2000-0SC |
2000 |
3000 |
2180 |
1500 |
2930 |
1960 |
DOUBLE-SIDE |
GF2000-03A |
GF2000-03B |
GF2000-03C |
2200 |
1500 |
2180 |
1700 |
1430 |
1960 |
DOUBLE-SIDE |
GF2200-0SA |
GF2200-0SB |
GF2200-0SC |
Automatical Swing door Air Shower for Clean room
Air Shower is used to blow away dust on clothing, equipments, materials and tools before workers or objects enter the Clean Room; meanwhile, its Air Lock function may effectively control personnel passing in and out, as well as act as various levels of buffer room for clean room to prevent cross pollution.
AL-AS PERSONAL AIR SHOWER
